
-
13. Replace the top cover and you're done!
-
12. Replace the pressure loop.
-
11. Replace the long pins to dold the top foam piece down.
-
10. The bevelling keeps the top foam from sticking up too high.
-
9. I bevelled the top edge of the top foam piece so it would fit under the cover.
-
8. Old lining to the left, new one to the right.
-
7. Remove the old diffuser.
-
6. Remove the side pieces.
-
5. Remove the long pins that hold the top styrofoam piece in place.
-
4. Remove the "pressure loop".
-
3. Remove the 6 screws that hold the cover on.
-
2. Mixing box and new liner.
-
1. Remove the mixer from the enlarger head