-
13. Replace the top cover and you're done! -
12. Replace the pressure loop. -
11. Replace the long pins to dold the top foam piece down. -
10. The bevelling keeps the top foam from sticking up too high. -
9. I bevelled the top edge of the top foam piece so it would fit under the cover. -
8. Old lining to the left, new one to the right. -
7. Remove the old diffuser. -
6. Remove the side pieces. -
5. Remove the long pins that hold the top styrofoam piece in place. -
4. Remove the "pressure loop". -
3. Remove the 6 screws that hold the cover on. -
2. Mixing box and new liner. -
1. Remove the mixer from the enlarger head